|
A Series
Military Grade Power
Converters
The AB, AW and AM series of power supplies
were designed as military grade, stand alone devices requiring no external components for
operation. The entire series are 160 to 200 kHz, fixed frequency, switching power
supplies. The series utilize either push-pull forward or single ended forward converter
topologies. Control is accomplished via pulse width modulation in a current mode control
scheme.
These models are all encased in
five sided steel enclosures to minimize radiated noise. All models in these series contain
integral EMI filters for compliance to MIL-STD-461 for conducted emissions on the input
leads. Certified tests reports characterizing EMI performance are available upon request.
The AB, AW and AM series comply with the NAVMAT guidelines for component deterating.
"-883 screening" and Environmental Stress Screening (ESS) per the NAVMAT guidelines
are also available as options.
Ruggedized grade of the "A" series (RB, RM and RW) is the same as standard
models except for the use of plastic cased TO-220 type diodes and transistors. All other
component parts including the control IC and the input capacitors are the same.
|
Power Supply
Model |
Type |
Output
in Watts |
| AB |
DC-DC |
20, 35, 50, 100 and 200 |
| AM |
AC-DC/ DC-DC |
50, 100 |
| AW |
AC-DC/ DC-DC |
20, 35, 50, 100 and 200 |
 A series Catalog with "Ruggedized" models
[Products]
[Request Info.] [Terms & Conditions]
[Warranty Information] [Engineering Department]
[EMI Reports] [Environmental
Reports] [Product Search]
Please send site comments / suggestions
to our Webmaster
Martek Power Abbott, Inc.
1111 Knox Street
Torrance, CA 90502
Tel: (310) 202-8820 Fax: (310) 836-4926
© 2008 Martek Power Abbott, Inc. All Rights Reserved.
This page last updated on
June 04, 2008 10:44 AM. |
